| Type version | -
|
| Lamp type | CDMe/CPO
|
| Number of lamps | 1
piece/unit
|
| Suitable for outdoor use | Yes
|
| Number of products on MCB (16 A type B) (nom.) | 13
|
| Default lamp selected | CDMe210
|
| Automatic restart | Yes
|
| Input Voltage | 208-240-277
V
|
| Input frequency | 50 to 60
Hz
|
| Minimum mains voltage operation (min.) | 172
V
|
| Operating frequency (nom.) | 0.20
kHz
|
| Power factor 100% load (nom.) | 0.99
|
| Ignition voltage (max.) | 5
kV
|
| Ignition switch-off time (max.) | 20
min
|
| Mains voltage performance (AC) | 188-305V
|
| Mains voltage safety (AC) | 160-305V
|
| Power factor 50% load (min.) | 0.98
|
| Earth leakage current (max.) | 0.7
mA
|
| Output peak voltage (max.) | 250
V
|
| Inrush current width | 4
ms
|
| Lamp power tolerance | -3%/+3%
|
| Input current (nom.) | 1.11
A
|
| Inrush current peak (max.) | 4
A
|
| Efficiency at full load [%] | 91.29
%
|
| Cable capacity output wires mutual (nom.) | 1000
pF
|
| Cable length from device to lamp | 3
m
|
| Wire strip length | 10.0-11.0
mm
|
| Ballast contact wire cross section | 0.50-2.50
mm²
|
| Connector type | WAGO series 804
|
| Rated ballast-lamp power | 210 W
|
| Power loss on CDMe/CPO while dimming | 11
W
|
| Power loss on CDMe/CPO | 18
W
|
| Lamp power on CDMe/CPO | 210
W
|
| System power on CDMe/CPO | 228
W
|
| Rated lamp power on CDMe/CPO | 210
W
|
| T-ambient (max.) | 50
°C
|
| T-ambient (min.) | -30
°C
|
| T storage (max.) | 50
°C
|
| T storage (min.) | -30
°C
|
| T-case lifetime (nom.) | 80
°C
|
| T-case switch off (min.) | 92
°C
|
| Control interface | PROG
|
| Programmable lamp settings | SON250/CDO250/CDMe250
|
| Pre-set integrated controls | Dali
|
| Programmable dimming options | ALO/CLO/Dynadimmer/lineswitch/AmpDi
|
| Run-up time before dimming | 0
min
|
| Fade-down rate | 0.7
%/sec
|
| Fade-up rate | 7.9
%/sec
|
| Control input protection | Yes (Basic insulation)
|
| Regulating level | 37%-100%
|
| Housing | C2
|
| Surge protection (common/differential) | EN61547 (L-L 2kV, L-G 4kV), 10kV TIL
kV
|
|||
| IP luminaire classification | 34
|
|||
| Active temperature protection | Yes
|
|||
| EMI 9 kHz ... 300 MHz | CISPR 15 ed 7.2
|
|||
| EMI 30 MHz ... 1,000 MHz | -
|
|||
| Safety standard | IEC 607, 609, 926, 928
[ No Standard for HID Lamp drivers exists. Requirements in these standards to be used if considered relevant for the product.] |
|||
| Quality standard | ISO 9000:2000
|
|||
| Environmental standard | ISO 14001
|
|||
| Harmonic current emission standard | IEC 61000-3-2
|
|||
| Vibration standard | IEC 68-2-6 Fc (10-150Hz, 2G)
|
|||
| Bumps standard | IEC 68-2-29 Eb (10G/16ms)
|
|||
| Humidity standard | EN 61347-2-12 clause 11
|
|||
| Approval marks | F-Marking
|
CE marking
|
ENEC certificate
|
VDE-EMV certificate
|
| Humming and noise level | 37 dB(A)
|
| Full product code | 871829122269900
|
| Order product name | HID-DV PROG Xt 210 CDMe/CPO C2 208-277V
|
| EAN/UPC – product | 8718291222699
|
| Order code | 913700676966
|
| SAP numerator – quantity per pack | 1
|
| Numerator – packs per outer box | 6
|
| SAP material | 913700676966
|
| Net Weight (Piece) | 1.420
kg
|
