HF-Performer III TL5 is a sustainable, slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT).
Benefits
Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution).
The programmed start enables the lamp to be switched on and off without reducing useful lamp life.
DC emergency operation in line with IEC/EN 60598-2-22 luminaire norms
Suitable for luminaires in protection class I and, after testing, class II
Features
50,000-hour lifetime at maximum case temperature, combined with over 60,000 on/off switches on one lamp
Programmed, flicker-free, pre-heated start (< 1.0 s) which allows the lamp to be switched on and off without reducing useful lamp life
Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations
The unit is protected against excessive mains voltage and incorrect connections
The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring.
Applications
Used with movement-detection control systems like Philips OccuPlus
Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools
Class I outdoor applications, e.g. industrial premises and parking lot
