DynaVision Programmable Xtreme for CDMe

HID-DV PROG Xt 210 CDMe/CPO C2 208-277V

HID-DV PROG Xt 210 CDMe/CPO C2 208-277V

  • Xtreme drivers for maximum energy savings

    HID-DV PROG Xt 210 CDMe/CPO C2 208-277V

    Product information

    Downloads

    Leaflet
    Size:743.4 kB

    See all downloads

Videos

[trigger to render Video Gallery]

Images

Specifications Show all

General Information
Type version
-
Lamp type
CDMe/CPO
Number of lamps
1 piece/unit
Suitable for outdoor use
Yes
Number of products on MCB (16 A type B) (nom.)
13
Default lamp selected
CDMe210
Automatic restart
Yes
Operating and Electrical
Input voltage
208-240-277 V
Input frequency
50-60 Hz
Minimum mains voltage operation (min.)
172 V
Operating frequency (nom.)
0.20 kHz
Power factor 100% load (nom.)
0.99
Ignition voltage (max.)
5 kV
Ignition switch-off time (max.)
20 min
Mains voltage performance (AC)
188-305V
Mains voltage safety (AC)
160-305V
Power factor 50% load (min.)
0.98
Earth leakage current (max.)
0.7 mA
Output peak voltage (max.)
250 V
Inrush current width
4 ms
Lamp power tolerance
-3%/+3%
Input current (nom.)
1.11 A
Inrush current peak (max.)
4 A
Wiring
Cable capacity output wires mutual (nom.)
1000 pF
Cable length from device to lamp
3 m
Wire strip length
10.0-11.0 mm
Ballast contact wire cross section
0.50-2.50 mm²
Connector type
WAGO series 804
System characteristics
Rated ballast-lamp power
210 W
Power loss on CDMe/CPO while dimming
11 W
Power loss on CDMe/CPO
18 W
Lamp power on CDMe/CPO
210 W
System power on CDMe/CPO
228 W
Rated lamp power on CDMe/CPO
210 W
Temperature
T ambient (max.)
50 °C
T ambient (min.)
-30 °C
T storage (max.)
50 °C
T storage (min.)
-30 °C
T case lifetime (nom.)
80 °C
T-Case switch off (min.)
92 °C
Controls and Dimming
Control interface
PROG
Programmable lamp settings
SON250/CDO250/CDMe250
Pre-set integrated controls
Dali
Programmable dimming options
ALO/CLO/Dynadimmer/lineswitch/AmpDi
Run-up time before dimming
0 min
Fade-down rate
0.7 %/sec
Fade-up rate
7.9 %/sec
Control input protection
Yes (Basic insulation)
Regulating level
37%-100%
Mechanical and Housing
Housing
C2
Approval and Application
Surge protection (common/differential)
EN61547 (L-L 2kV, L-G 4kV), 10kV TIL kV
IP luminaire classification
34
Active temperature protection
Yes
EMI 30 MHz... 1,000 MHz
-
Safety standard
IEC 607, 609, 926, 928  [ No Standard for HID Lamp drivers exists. Requirements in these standards to be used if considered relevant for the product.]
Quality standard
ISO 9000:2000
Environmental standard
ISO 14001
Harmonic current emission standard
IEC 61000-3-2
Vibration standard
IEC 68-2-6 Fc (10-150Hz, 2G)
Bumps standard
IEC 68-2-29 Eb (10G/16ms)
Humidity standard
EN 61347-2-12 clause 11
Approval marks
F-Marking
CE marking
ENEC certificate
VDE-EMV certificate
Humming and noise level
37 dB(A)
Product Data
Full product code
871829122269900
Order product name
HID-DV PROG Xt 210 CDMe/CPO C2 208-277V
EAN/UPC – product
8718291222699
Order code
913700676966
Numerator – quantity per pack
1
Numerator – packs per outer box
6
Material no. (12NC)
913700676966
Net weight (piece)
1.420 kg
Installation Diagrams
HID-DV DALI & LS Xt
HID-DV DALI & LS Xt

Recently Viewed

    • Manage your projects with MyProjects
      Use MyProjects to create, save manage and share items and projects with you colleagues and team members.
You are now visiting our Global professional lighting website, visit your local website by going to the USA website